So I have a 2018 xp1k with a cagewrx race cage and I'm looking for window nets. Curious whats out there that will work with this cage.
Brandon
Brandon
↧
Windows Nets for Cagewrx Race Cage
↧
Tires
Has anyone had any luck with the bighorn style tire called Journeys ?
Sent from my iPhone using RZRForums.net
Sent from my iPhone using RZRForums.net
↧
↧
10 Trailer - Will it work for an XP1000?
Looking for confirmation whether a 5.5 or 6x10 utility trailer will work for a 2019 XP 1000? Any specific brands recommended? Thanks!
↧
Dash Switch Locations
Do the stock switch locations align with the aftermarket plates that add a switch? I want to add a smaller switch for now, adjacent to the two on the passenger side, but I want to place it so that it will align with the third switch location if I decide to add a switch plate. Thanks.
↧
Pros and cons of forward a-arms
I’m looking at getting some high clearance A-arms for my 18. But I've been reading that alot of people go with a forward set. What are some benefits of going with forward a-arms and what are some cons of them? I ride a lot of wet trails over here in east Tennessee so just looking for my best option without breaking the bank and without breaking a pile of parts. And I’m only wanting to run 32’s. Thanks for the input!
↧
↧
1000
So I have 2018 RZR 1000 someone switched out my computer for a 2016 computer. Now I have codes:
P0314: Cylinder Misfire. Misfire.
P0302: Cylinder 2 Misfire. Misfire.
P1170: Issue: Engine fueling is too rich.
Anyone else has had these codes? Need help please.
P0314: Cylinder Misfire. Misfire.
P0302: Cylinder 2 Misfire. Misfire.
P1170: Issue: Engine fueling is too rich.
Anyone else has had these codes? Need help please.
↧
Ride command
New RZR and got it good and dirty today. Can the speakers be sprayed with soap and water, I need to wash bur scared to get my speakers wet.
↧
Wheel Bearing Grease Tool won't slide in Hub
Innuendos aside, brand new 2019 xp1000 TRE and 44mm tool. Yes, it is lubed lol, wont go any further than in pic. I've jiggled the axle and raised and lowered the jack under trailing arm, even tapped on it lightly with a hammer. Any tips for getting it in?
https://www.dropbox.com/s/7fscqzswf6...04232.jpg?dl=0
https://www.dropbox.com/s/37tiplowpk...04251.jpg?dl=0
https://www.dropbox.com/s/7fscqzswf6...04232.jpg?dl=0
https://www.dropbox.com/s/37tiplowpk...04251.jpg?dl=0
↧
2014 XP 1000 not starting
So I had to take my rzr in a couple weeks back to get the shifter cable replaced and I just took it out for the first time after getting it fixed on the weekend and it lasted 15 minutes and stalled on me. Now it won’t start and barely turns over. Just wondering if anyone on here has any insight on where to look first as I’m fairly new to the rzr community. I made sure the battery was charged and still had the same issue. Checked all the fuses and they’re all good. I pulled the spark plugs out to check the spark but it wouldn’t turn over enough to get them to spark, all that happend was a puff of air came out of the spark plug holes and I could smell gas. Any help would be really appreciated!!
↧
↧
Axiom side by side New Front Glass Windshield
Axiom side by side now has our New Front DOT Glass Windshield listed for sale on our website WWW.AXIOMSIDEBYSIDE.COM In stock and ready to ship. We now have them for the 2014 - 2019 XP1000 and Turbo. These windshields have fully adjustable Ram Air intakes in the front to help keep you Cool! Looks Great Too! Shop now at WWW.AXIOMSIDEBYSIDE.COM 513-201-0749 Mail@axiomsidebyside.com PS, Turbo S Front windshield Coming soon. In development and testing Now!
↧
1000xp 2015 2 seater differential question
I have a 2015 1000xp 2 seater with a bad plastic sprague. All the parts I see says fits 1333344 or 1333112 differential and each sprague shows to be different for each part number diff. My oem sticker on the diff has fallen off. How can I determine what sprague cage I need or what diff I have. I don’t like ordering stuff twice. Thanks
↧
Exhaust options
Best aftermarket exhaust that isnt stupid loud?
2018 xp1k with the AA clutch kit and Lvl 1 tune.
Here are my options:
HMF, AA, Trinity, MBRP, Gibson or Empire.
I would like something coated black too.
Sent from my iPhone using RZRForums.net
2018 xp1k with the AA clutch kit and Lvl 1 tune.
Here are my options:
HMF, AA, Trinity, MBRP, Gibson or Empire.
I would like something coated black too.
Sent from my iPhone using RZRForums.net
↧
New Motor, Started and ran twice now it won’t sart
I have a 2014 RZR 1000 that I just purchased and installed a rebuilt motor from Rev6 outta Utah. Was very impressed with the job they had done. I installed the motor in my Rzr and cranked it with water and oil both. Ran great. Killed the motor because I didn’t want to get it to hot and installed the reset of the parts I had to take off the Rzr to get it out. Now it’s 100% back together and it will not start. I am getting spark. Fuel injectors have a nice spray pattern. I have no idea what is causing this problem and and very frustrated. Please Help! THANKS
↧
↧
New POLARIS Sunglasses Naming Contest!
Hey Gang!
We have a licensing agreement to develop sunglasses for Polaris in a co-partnership! And we are going to introduce these sometime in mid-summer to early fall.
We are working with a company that has launched an extremely popular multi-million dollar line of glasses in the top end market that sell for $200 - $300. Our Polaris glasses will have the same kinds of features but be 50-75% less than that. You can see some general ideas of what we are looking at below from our rapid prototypes (colors are not relevant as those will change.)
We are launching eight different frame styles at first and so we need eight great offroad oriented names -- one for each style. If your name gets chosen, we'll send you a free set of glasses when they are ready!
So get those names going. We once named our VIPER ELITE winches based on board feedback and we want to do the same here!
Attachment 573306
Attachment 573308
Attachment 573310
Attachment 573312
We have a licensing agreement to develop sunglasses for Polaris in a co-partnership! And we are going to introduce these sometime in mid-summer to early fall.
We are working with a company that has launched an extremely popular multi-million dollar line of glasses in the top end market that sell for $200 - $300. Our Polaris glasses will have the same kinds of features but be 50-75% less than that. You can see some general ideas of what we are looking at below from our rapid prototypes (colors are not relevant as those will change.)
We are launching eight different frame styles at first and so we need eight great offroad oriented names -- one for each style. If your name gets chosen, we'll send you a free set of glasses when they are ready!
So get those names going. We once named our VIPER ELITE winches based on board feedback and we want to do the same here!
Attachment 573306
Attachment 573308
Attachment 573310
Attachment 573312
↧
2014 do 1000 fuel controller
Anybody have a power commander fc fuel controller that will work on a 2014? Looking for a good deal in a used part that’s still operational. Maybe even a dynatek fs. Let me know if anyone has anything. Thanks
↧
Looking For Quiet Exhaust
Hi All, I have a 2014 XP1000 with the stock exhaust. I'm looking for a quieter replacement. I found threads from 2008 and 2016, watched the UTV Action Exhaust Buyers guide, and poked around other internet sites. Some offer systems for 2015-19. Seems 99% of aftermarket are going for performance at the cost of sound. That's fine for others, just not what I'm looking for. Would prefer a slip on for the price and since I'm not going for total performance. And yes we wear helmets with ear plugs. Kind of leaning toward the SLP Performance Muffler, but don't know . Real world advice please. Also any advice on sound proofing? Thanks, DougH
↧
Spare Tire Rim
Looking for a cheap rim for the spare tire on my 2019 1000 XP. Running 30 x 10 x 14 Terrabytes. I also want it to use the stock lug nuts. Tried the ITP steel wheel but there is only 1/16" between the inside of the rim and the brake caliper. Thanks in advance.
↧
↧
Strange noise in left rear going down hill
When going down hill and letting the engine brake control speed there is a loud sound like a brake is dragging or locked up wheel.
The wheel never stops turning and applying the brake stops it.
Friend has a twin to mine and its doing the same thing. Both are 2018 xp1000.
Any ideas on what to look at.
Thanks
The wheel never stops turning and applying the brake stops it.
Friend has a twin to mine and its doing the same thing. Both are 2018 xp1000.
Any ideas on what to look at.
Thanks
↧
FRESH AIR SYSTEM??
Looking for a dual helmet fresh air system. Found some older threads, wondering which is the best for the money now.
PCI, Rugged, Parker?
PCI, Rugged, Parker?
↧
Review on Hunterworks thick belt
Just a prologue:
I have a 2015 RZR 1K EXP 2 seater. I have right at 12K miles. I drive like a normal person and do not abuse my Rzr. My trail riding is usually between 10-20 mph and my smooth road between 30-40. Some riding lower than 10 in rough terrain and occasionally at 45 mph. My original OEM belt lasted 3500 miles and I just tossed it and put on a Gates belt and it and the next one lasted 3500 miles each. All three belts always looked good when I changed them. I did have a lot of belt/clutch squeal and high rpm belt noise, but no issues.
So I decided to try the Hunterworks thick belt to compare.
I broke the belt in for 30 miles in low at varying speeds and towards the end in high at 30 mph. I now have about 230 miles on it. It does seem to engage at lower rpms better, but does have a little squeal for 2 seconds as you just start. It is much quieter after you get going than the the OEM or Gates. It seems to stay engaged much better at low down hill rpms with engine braking. It does run 15F hotter across the board than the others, but that can probably be expected with a thicker heavier belt. I run a Razorback temp gauge.
So far everything seems to be good and other than the temp increase and tiny squeal (minor) at take off I have no complaints and it seems to work well. There is no fixing belt noise and if you have it you have it.
By the end of August I'll have around 3000 miles on the belt and will know more.
I have a 2015 RZR 1K EXP 2 seater. I have right at 12K miles. I drive like a normal person and do not abuse my Rzr. My trail riding is usually between 10-20 mph and my smooth road between 30-40. Some riding lower than 10 in rough terrain and occasionally at 45 mph. My original OEM belt lasted 3500 miles and I just tossed it and put on a Gates belt and it and the next one lasted 3500 miles each. All three belts always looked good when I changed them. I did have a lot of belt/clutch squeal and high rpm belt noise, but no issues.
So I decided to try the Hunterworks thick belt to compare.
I broke the belt in for 30 miles in low at varying speeds and towards the end in high at 30 mph. I now have about 230 miles on it. It does seem to engage at lower rpms better, but does have a little squeal for 2 seconds as you just start. It is much quieter after you get going than the the OEM or Gates. It seems to stay engaged much better at low down hill rpms with engine braking. It does run 15F hotter across the board than the others, but that can probably be expected with a thicker heavier belt. I run a Razorback temp gauge.
So far everything seems to be good and other than the temp increase and tiny squeal (minor) at take off I have no complaints and it seems to work well. There is no fixing belt noise and if you have it you have it.
By the end of August I'll have around 3000 miles on the belt and will know more.
↧